Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of a Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Today, we will discover the procedure necessary to remove and replace the rear door panel of a Renault Captur. First, open the rear door and start removing the caps found on the opening handle and the grab handle by unscrewing the screws underneath; then, pry at the sides of the panel until it detaches and remove it, disconnecting the handle cable and the electrical connector, as shown in the video.

At this point, you can replace and reassemble the door panel by applying the reverse procedure of disassembly!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Renault Captur?
How to Remove the Radio from a Renault Captur?
Renault Captur (2013-2019 / MK 1) Hello, today's guide aims to remove the radio from your Renault Captur. Start by sitting in the driver's seat. Then, using a thin but sturdy tool, di…
Disassembly of the rear bumper of the Renault Captur
Disassembly of the rear bumper of the Renault Captur
Renault Captur (2019-2026 / MK 2) To remove the bumper of the Renault Captur, start by opening the rear hatch. Using a Torx T20 screwdriver, unscrew the two screws on the inner side o…
How to Remove the Radio from a Renault Captur
How to Remove the Radio from a Renault Captur
Renault Captur (2013-2019 / MK 1) Removing the factory radio from your first-generation Renault Captur (2013-2019) takes just a few minutes. Follow these steps to complete the operati…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos