Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Car stereo

Removing the factory radio from your first-generation Renault Captur (2013-2019) takes just a few minutes. Follow these steps to complete the operation correctly. First, get into the car and ensure it is completely off. Next, use a very thin and sufficiently rigid object to remove the entire protective trim surrounding the car radio. Then, undo the various screws present and finally disconnect the electrical cable located at the rear to complete the removal.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the car radio of a Renault Captur?
How to remove the car radio of a Renault Captur?
Renault Captur (2013-2019 / MK 1) Good morning, today's guide aims to dismantle the car radio of our Renault Captur. Let's start by sitting in the driver's seat. Then, using a thin bu…
How to replace the car radio in the Renault Captur?
How to replace the car radio in the Renault Captur?
Renault Captur (2013-2019 / MK 1) In this tutorial we can see how to replace the car radio in the Renault Captur, an extremely simple and fast operation. First of all, make sure that …
How do you replace the radio of the Renault Captur?
How do you replace the radio of the Renault Captur?
Renault Captur (2013-2019 / MK 1) In order to replace the car radio of the Renault Captur, you need to use a tool like a screwdriver to pry off the panel surrounding the device: once …

    Frequently Asked Questions

    • Captur 2019-2026 - What to do when the touch screen on Renault Captur does not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos