Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Standard Radio in a Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Car stereo

This guide outlines the steps to remove and replace the standard radio in a Renault Captur, as well as in a Clio. First, get inside the vehicle and start by removing the plastic cover of the central instrument panel, prying it off from the sides. Then, unscrew the four screws securing the radio on the sides, disconnecting the electrical connectors found at the back, as shown in the video. At this point, repair the radio or directly replace it with a new one, applying the reverse procedure for reassembly!

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Original Radio from Renault Captur
Removing the Original Radio from Renault Captur
Renault Captur (2013-2019 / MK 1) This guide shows you how to remove the original radio from a first-generation Renault Captur by following these simple steps. First, get inside the v…
How to Remove the Radio from a Renault Captur
How to Remove the Radio from a Renault Captur
Renault Captur (2013-2019 / MK 1) This video shows the procedure to remove the radio from the Renault Captur for replacement. The process is very simple and quick. To perform it, use …
How to Remove the Radio from a Renault Captur
How to Remove the Radio from a Renault Captur
Renault Captur (2013-2019 / MK 1) Removing the factory radio from your first-generation Renault Captur (2013-2019) takes just a few minutes. Follow these steps to complete the operati…

    Frequently Asked Questions

    • Captur 2019-2026 - What to do when the touch screen on Renault Captur does not work? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos