Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Renault Captur

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Rear bumper

See other generations:
Video tutorial

To remove the bumper of the Renault Captur, start by opening the rear hatch. Using a Torx T20 screwdriver, unscrew the two screws on the inner side of the headlight, detach the headlight and disconnect the electrical connector.

Repeat the same process on the other side. Unscrew the two screws at the base of the rear hatch, as well as the ones on the lower edge of the bumper and on the wheel arch.

Detach a part of the wheel arch trim and start releasing the bumper from the fixing clips, using a plastic lever if necessary to avoid scratching the surfaces, until it is completely removed.


Posted on 6 January 2025 by ScegliAuto


Related tutorials

How to remove the rear bumper of a Renault Captur
How to remove the rear bumper of a Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting, open the tailgate of the boot of your Renault Captur. Begin by removing the rear lights by unscrewing the fixing screws and disconne…
How to Remove the Bumper on Renault Captur
How to Remove the Bumper on Renault Captur
Renault Captur (2013-2019 / MK 1) Learn how to remove a front bumper on a Renault Captur: lift the bonnet and secure it, raise the car on a jack; using a plastic or metal lever, remov…
Removing the Rear Bumper of the Renault Captur
Removing the Rear Bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting the removal of the rear bumper of the Renault Captur, secure the vehicle on a flat surface or place it on a ramp. Now, open the boot …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos