Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of a Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bumper

See other generations:
Video tutorial

Before starting, open the tailgate of the boot of your Renault Captur. Begin by removing the rear lights by unscrewing the fixing screws and disconnecting the electrical connectors.

Once done, unscrew the bolts securing the rear bumper to the chassis, located around the perimeter of the bumper, then unclip and remove the fixing clips. This will free the rear bumper.

At this point, unclip and remove the bumper itself, and finally take it off. Once you complete this step, you will have finished the removal.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to disassemble the front bumper of the Renault Captur
How to disassemble the front bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) The instructions in this guide will show us how to disassemble and replace the front bumper of the Renault Captur. First, we open the hood of the car…
Removing the Front Bumper of the Renault Captur
Removing the Front Bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) In this brief and simple guide, follow the steps to remove and replace the front bumper of the Renault Captur. First, move to the side of the vehicle…
Removing the Rear Bumper of the Renault Captur
Removing the Rear Bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting the removal of the rear bumper of the Renault Captur, secure the vehicle on a flat surface or place it on a ramp. Now, open the boot …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos