Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Rear bumper

Before starting the removal of the rear bumper of the Renault Captur, secure the vehicle on a flat surface or place it on a ramp. Now, open the boot and unscrew the four screws that secure the two rear light clusters using a suitable screwdriver. Remove the light clusters from their housing after disconnecting the electrical connectors. Next, unscrew the screws that secure the bumper: one located inside each wheel arch and eight found at the bottom of the bumper itself. Remove the outer trim from the wheel arch profiles, unscrew the two side screws located on the upper edge of the bumper, and you can then remove the bumper from its position.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Renault Captur
Removing the Front Bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) In this brief and simple guide, follow the steps to remove and replace the front bumper of the Renault Captur. First, move to the side of the vehicle…
Disassembly of the rear bumper of the Renault Captur
Disassembly of the rear bumper of the Renault Captur
Renault Captur (2019-2026 / MK 2) To remove the bumper of the Renault Captur, start by opening the rear hatch. Using a Torx T20 screwdriver, unscrew the two screws on the inner side o…
How to remove the rear bumper of a Renault Captur
How to remove the rear bumper of a Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting, open the tailgate of the boot of your Renault Captur. Begin by removing the rear lights by unscrewing the fixing screws and disconne…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos