Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Front bumper

In this brief and simple guide, follow the steps to remove and replace the front bumper of the Renault Captur. First, move to the side of the vehicle and begin removing the front wheel arch liners by taking out the plastic clips; then unclip the bumper from the sides as shown in the video. At this point, undo the screws located at the top of the front bumper, and then remove the screws found underneath the bumper to take it off completely; apply the reverse procedure for reassembly!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Bumper on Renault Captur
How to Remove the Bumper on Renault Captur
Renault Captur (2013-2019 / MK 1) Learn how to remove a front bumper on a Renault Captur: lift the bonnet and secure it, raise the car on a jack; using a plastic or metal lever, remov…
How to disassemble the front bumper of the Renault Captur
How to disassemble the front bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) The instructions in this guide will show us how to disassemble and replace the front bumper of the Renault Captur. First, we open the hood of the car…
How to remove the rear bumper of a Renault Captur
How to remove the rear bumper of a Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting, open the tailgate of the boot of your Renault Captur. Begin by removing the rear lights by unscrewing the fixing screws and disconne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos