Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Front bumper

In this video, we see how to remove the front bumper of the Renault Captur: the first thing we need to do is loosen the screws inside the wheel arches; this will allow us to remove the outer seal of the fender, at least until the point where we need to remove the front bumper. We will keep the fender away from the body with a cardboard. We move the wheel arch and see which screws we need to remove from the inside to remove the bumper. At the bottom, there are two screws in the corner on each side. Then three in the center of the bumper. At the top, we will easily remove four, which are very visible; two of which secure the headlight group, and for which we need to be careful - when we remove the bumper - because there are electrical connectors to disconnect.

Posted on 5 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Renault Captur
Removing the Front Bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) In this brief and simple guide, follow the steps to remove and replace the front bumper of the Renault Captur. First, move to the side of the vehicle…
How to disassemble the front bumper of the Renault Captur
How to disassemble the front bumper of the Renault Captur
Renault Captur (2013-2019 / MK 1) The instructions in this guide will show us how to disassemble and replace the front bumper of the Renault Captur. First, we open the hood of the car…
How to Remove the Bumper on Renault Captur
How to Remove the Bumper on Renault Captur
Renault Captur (2013-2019 / MK 1) Learn how to remove a front bumper on a Renault Captur: lift the bonnet and secure it, raise the car on a jack; using a plastic or metal lever, remov…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos