Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

Video tutorial

If you own a Renault Captur and want to find out how to quickly and safely remove the rear light, all you have to do is read the following guide and follow the steps described. First of all, make sure your Renault Captur is turned off, then lift the rear hood of the vehicle and locate the screws located near the light you want to remove.

Unscrew them with a crosshead screwdriver. Then pull the light towards you, disconnect the electrical cable, and at this point the procedure is successfully completed.


Posted on 2 November 2025 by ScegliAuto


Related tutorials

Replacement of the rear headlight bulbs of the Renault Captur
Replacement of the rear headlight bulbs of the Renault Captur
Renault Captur (2013-2019 / MK 1) Below we will see the procedure that will allow us to disassemble and replace the bulbs of the rear headlight of the Renault Captur. First, we open t…
How to replace the rear headlight bulb of the Renault Captur
How to replace the rear headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the rear headlight bulb of the Renault Captur, we need to open the trunk of the car and then remove the tailgate. After removing the tailg…
How to replace the rear light bulb on the Renault Captur?
How to replace the rear light bulb on the Renault Captur?
Renault Captur (2019-2026 / MK 2) Replacing the rear light bulb on a Renault Captur is a straightforward task. First, open the boot and then unscrew the two side screws of the light u…

Location of the Jack and Spare Wheel of the Toyota Yaris

In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other.

Watch the video!


by ScegliAuto

More videos