Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulbs of the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Tail light bulb

Below we will see the procedure that will allow us to disassemble and replace the bulbs of the rear headlight of the Renault Captur. First, we open the rear door of the trunk and start unscrewing the fixing screws that we find on the sides of the headlight, disconnecting the electrical connector to remove it; then we remove the bulb holder from the light fixture, replacing any faulty stop bulbs with new ones, as shown in the video. Replace the entire rear light if necessary, applying the reverse procedure for reassembly!

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Captur
How to replace the rear headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the rear headlight bulb of the Renault Captur, we need to open the trunk of the car and then remove the tailgate. After removing the tailg…
How to disassemble the rear headlight of the Renault Captur
How to disassemble the rear headlight of the Renault Captur
Renault Captur (2013-2019 / MK 1) If you own a Renault Captur and want to find out how to quickly and safely remove the rear light, all you have to do is read the following guide and …
How to replace the front headlight bulb of the Renault Captur
How to replace the front headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) Today we will explain how to replace the left front headlight bulb of the Renault Captur 1 on your own. To replace the bulb, we need to open the fron…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos