Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Renault Captur.

Model: Renault Captur MK 1 - Years 2013-2019
Part: Headlight bulb

Today's instructions will allow us to dismantle and replace the headlight bulb of the Renault Captur. First, let's open the car's hood and start removing the plastic cover located behind the headlight; then, we disconnect the electrical connector of the bulb by releasing the metal clip to remove it from the headlight, as shown in the video. At this point, we install the new low beam bulb of the correct type (in this case, with an H1 socket); we reassemble the light and connect it, checking its functionality.

Posted on 28 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Renault Captur
How to replace the front headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) Today we will explain how to replace the left front headlight bulb of the Renault Captur 1 on your own. To replace the bulb, we need to open the fron…
How to replace the rear headlight bulb of the Renault Captur
How to replace the rear headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the rear headlight bulb of the Renault Captur, we need to open the trunk of the car and then remove the tailgate. After removing the tailg…
How to replace the rear headlight bulb of the 2017 Renault Captur
How to replace the rear headlight bulb of the 2017 Renault Captur
Renault Captur (2013-2019 / MK 1) Replacing the rear headlight bulb on a 2017 Renault Captur car is a simple and quick operation that can be done independently. To replace the bulb, w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos