Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in the Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Headlight bulb

This tutorial shows how to replace the headlight bulbs in the Renault Captur, a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. Start by opening the bonnet, then move to the back of the headlight, remove the large circular rubber cover, and disconnect the power connector. Once done, extract the bulb from the housing after unlocking the corresponding metal clip, as shown in the video. At this point, you can fit the replacement by following the reverse procedure.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Renault Captur
How to replace the front headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) Today we will explain how to replace the left front headlight bulb of the Renault Captur 1 on your own. To replace the bulb, we need to open the fron…
Replacement of the front headlight bulb of the Renault Captur.
Replacement of the front headlight bulb of the Renault Captur.
Renault Captur (2013-2019 / MK 1) Today's instructions will allow us to dismantle and replace the headlight bulb of the Renault Captur. First, let's open the car's hood and start remo…
Replacement of the rear headlight bulbs of the Renault Captur
Replacement of the rear headlight bulbs of the Renault Captur
Renault Captur (2013-2019 / MK 1) Below we will see the procedure that will allow us to disassemble and replace the bulbs of the rear headlight of the Renault Captur. First, we open t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos