Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Renault Captur

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

The tyre monitoring system in the Renault Captur is very intuitive and allows easy access. The warning is displayed whenever the wheel sensors detect a pressure value lower than expected, so check the reason for this, whether the tyres are simply deflated or something else.

After securing the tyres, you can reset the warning by turning on the instrument panel and pressing the arrow buttons on the right side of the steering wheel to navigate to the tyre section. Finish by holding down the Ok button to authorise the reset.


Posted on 2 February 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Renault Captur?
How to reset the tyre pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the tyre pressure warning light on the Renault Captur, insert the key into the ignition barrel and turn it to activate the instrument cluste…
How do you reset the tire pressure warning light on the Renault Captur?
How do you reset the tire pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) In order to reset the tire pressure warning light of the Renault Captur, you need to inflate the tires until they reach the correct pressure value: t…
How to Reset the Tyre Pressure Warning Light on the Renault Captur?
How to Reset the Tyre Pressure Warning Light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the tyre pressure warning light on the Renault Captur, first inflate the tyres to the correct pressure, which is indicated on the sticker af…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos