Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Service warning light

Learn how to reset the service light on a Renault Clio IV: the Clio IV has two types of service to reset: the main interval (30,000 miles or 12 months) and the secondary interval (30,000 miles or 24 months). Turn on the ignition and use one of the buttons at the end of the wiper stalk to navigate through the onboard computer menu until you reach the "service/check" option. Press and hold the upper button until the display starts flashing: keep holding until it shows the new interval. Repeat the same procedure to reset the secondary service.

Posted on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
How to Reset the Service Light on a Renault Clio 3
How to Reset the Service Light on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) When the service light illuminates on the instrument cluster of your Renault Clio Mk3 (2005-2013) despite having already completed the service, you m…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos