Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Headlight Bulb on a Renault Modus?

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

Video tutorial

This video shows how to replace a headlight bulb on a Renault Modus. Open the bonnet and locate the back of the affected headlight.

Remove the rubber or plastic cover protecting the bulb. Disconnect the electrical connector, taking care with the clips, then unscrew or unclip the old bulb.

Insert the new bulb in the same orientation, avoiding touching the glass with your fingers, as grease can reduce its lifespan. Reconnect the connector, reposition the protective cover, and close the bonnet.


Posted on 12 August 2026 by ScegliAuto


Related tutorials

Removing the Front Headlight Bulb on a Renault Modus
Removing the Front Headlight Bulb on a Renault Modus
Renault Modus (2004-2013 / MK 1) In this video, you will learn how to change the front headlight bulb (dipped beam) on a Renault Modus. First, lift the bonnet and remove all the scre…
Replacing the Front Headlamp Bulb on the Renault Modus
Replacing the Front Headlamp Bulb on the Renault Modus
Renault Modus (2004-2013 / MK 1) Today’s steps will show you how to remove and replace the front headlamp bulb on the Renault Modus, following the instructions below. First, open the…
How to Replace the Front Headlight Bulb on the Renault Modus
How to Replace the Front Headlight Bulb on the Renault Modus
Renault Modus (2004-2013 / MK 1) The steps to replace the front headlight bulb on the Renault Modus are: First, open the vehicle's bonnet. Second, unscrew the screw located above the…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos