Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Modus
  6. : How to replace rear light bulbs on Renault Modus

Renault Modus - Video tutorial

Model: Renault Modus MK 1 - Years 2004-2013
Part: Light bulb
Operation: How to replace rear light bulbs on Renault Modus

If it is necessary to replace a bulb in a rear light on the car, proceed as follows: open the tailgate and locate the left and right plastic flaps located on the sides of the loading platform. Then open the flap on the side on which the lamp is to be replaced. Inside the flap, then undo the screw located behind the light unit and then pull the light outwards. Be careful to release the electrical connection connector located behind the unit. Then loosen the bulb holder fixing clips, identify the bulb to be replaced and unhook it and position the new bulb. At that point, refit the bulb holder on the headlight, reconnect the terminal block and reposition the headlight.


Posted on 25 December 2022 by ScegliAuto



Replace the rear light bulbs on Renault Modus
Renault Modus (2004-2013 / MK 1) Should we replace the rear light bulbs on Renault Modus? Let's see how to disassemble and replace the bulbs: open the boot of the luggage compartment
How to replace light bulbs on Renault Modus
Renault Modus (2004-2013 / MK 1) How to replace the headlight bulbs on a Renault Modus: open the front hood by pulling the lever located at the bottom right of the dashboard, let's s
Guide to replacing Renault Modus headlight bulbs
Renault Modus (2004-2013 / MK 1) Today we will see, in this short and simple guide, how to disassemble and replace the headlight bulbs of the Renault Modus, in simple and quick steps

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos