Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the R-Link radio in a Renault Megane 4

Model: Renault Megane - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Car stereo

See other generations:
Video tutorial

To remove the R-Link radio on the Renault Megane 4, open the central compartment and locate the edges of the console panel. Gently insert plastic levers between the panel and the frame to release the clips along the entire perimeter.

Lift the upper panel until the radio is free, taking care with the rear electrical connectors. Disconnect all cables, including the power supply, speaker connections, and any USB or antenna ports.

At this point, the R-Link unit is completely detached and ready to be removed. For reassembly, reconnect all connectors, position the radio in its housing, and press the panel until the clips snap into place, ensuring it is correctly aligned.


Posted on 4 November 2026 by ScegliAuto


Related tutorials

How to restart the R-Link system of the Renault Megane
How to restart the R-Link system of the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this guide, we will see the instructions that will allow us to restart the R-Link system of the Renault Megane. First of all, we get on board the …
How do you reset the R-Link 2 of the Renault Megane?
How do you reset the R-Link 2 of the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) To reset the R-Link 2 system of the Renault Megane, you need to turn on the instrument panel by inserting the ignition key into the slot: then you wi…
How to Replace the Radio in a Renault Megane?
How to Replace the Radio in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the radio in a Renault Megane, use a tool to lever off the trim located at the front of the dashboard, on the passenger side. Next, remove…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos