Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio antenna of the Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Antenna

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the car radio antenna of the Renault Clio, in simple steps. First of all, let's move to the outside of the car and start unscrewing and removing the antenna from its base; in this case, only the antenna is being replaced (to also remove the base it will be necessary to access it from the inside, detaching the ceiling from the trunk), as shown in the video.

At this point, we screw and install the new antenna correctly, then checking the functioning of all radio stations!


Posted on 25 September 2025 by ScegliAuto


Related tutorials

How to Remove the Radio from a Renault Clio
How to Remove the Radio from a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) How to remove the radio navigation system from a Renault Clio? Before removing the radio, you need to take off the covering plastics. Turn off the ra…
How to Change the Radio on a Renault Clio
How to Change the Radio on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Let's see how to change the original radio in a Renault Clio. Turn off the car radio, then use the original or aftermarket metal keys to remove the r…
How do you replace the antenna of the Renault Clio?
How do you replace the antenna of the Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the antenna of the Renault Clio, you need to grab the old one and rotate it counterclockwise to remove it from its housing. Once the old a…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos