Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb of the Renault Scenic

Model: Renault Scenic - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

In this brief guide, we will go through the steps to remove and replace the dipped beam bulb of the front headlight of the Renault Scenic. First, open the vehicle's bonnet and start by removing the plastic cover located behind the front headlight; then disconnect the electrical connector of the bulb, releasing the metal clip to remove it, as shown in the video.

At this point, install the new dipped beam bulb, ensuring it has the same fitting; secure it in the headlight and connect it to check its proper functioning!


Posted on 9 November 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Replacing the right front headlamp bulb on a Renault Scenic MK3 is a simple task that can be done in a few minutes. To carry out the replacement, ope…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) This guide outlines the steps to remove and replace the front headlamp bulb on a Renault Scenic, following the instructions below. First, open the bo…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos