Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the front headlight bulb on a Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Headlight bulb

The instructions in this guide will illustrate how to replace the front headlight bulb on a Renault Scenic. First, open the vehicle's bonnet and start removing the plastic protection cap for the bulbs; then disconnect the electrical connector of the light, releasing any metal clip to remove it, as shown in the video. At this point, install the new dipped beam bulb of the correct type and with the same fitting; refit and connect the light, checking its correct operation!

Posted on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Renault Scenic?
Renault Scenic (2003-2009 / MK 2, Scenic 2) To replace the headlight bulb on the Renault Scenic, you need to open the hood so you can access the screws that secure the headlight to its housing:…
How to Replace the Headlight Bulb on a Renault Scenic
How to Replace the Headlight Bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before you begin, open the front bonnet of your Renault Scenic. Start by removing the blown bulb from its housing in the headlamp by turning the bulb…
How do you replace the front headlight bulb of the Renault Scenic?
How do you replace the front headlight bulb of the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To replace the headlight bulb of the Renault Scenic, you will need to open the hood to access the components inside the engine compartment. Once you …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos