Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dipped Beam Bulb of the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

This guide provides instructions on how to disassemble and replace the dipped beam bulb of the front headlamp of the Renault Scenic. First, open the bonnet of the vehicle and start removing the plastic cover protecting the bulb; then disconnect the electrical connector of the light and unclip the metal spring to remove and replace the bulb with the new one, as shown in the video.

Once the new bulb, of the correct type and with the same fitting, is installed, check its proper functioning, finally securing the protective cap.


Posted on 26 May 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlight Bulb on a Renault Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) To complete the replacement of the front headlight bulb on your Renault Scenic second series, follow the procedure outlined in this mini guide. First…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
Removing the Front Headlamp Bulb from a Renault Scenic
Removing the Front Headlamp Bulb from a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to remove the front headlamp bulb from a Renault Scenic. Lift the front bonnet of the car and locate the front headlamp bulbs. Find the…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos