Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs in a Renault Scenic?

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the bulbs of the front headlights in a Renault Scenic, a very simple and quick operation. First, ensure that the key is not inserted for full safety, then open the bonnet, locate the large cap at the back of the headlamp in question, and remove it. Next, disconnect the power connector, extract the old bulb by pulling it towards the inside of the vehicle, and insert the replacement without touching it directly with your bare hands.

At this point, simply reassemble everything by following the reverse procedure.


Posted on 20 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Renault Scenic
How to Replace the Front Headlight Bulbs on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today, you will learn how to replace the front headlight bulb on a Renault Scenic produced from 2009 to 2015. Replacing the bulb requires simple and …
Replacing a Indicator Bulb on a Renault Scenic
Replacing a Indicator Bulb on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Follow these steps to replace the indicator bulb on a Renault Scenic. Open the bonnet of the engine compartment and secure it. Remove the black plast…
How to Replace the Headlight Bulb on a Renault Scenic
How to Replace the Headlight Bulb on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before you begin, open the front bonnet of your Renault Scenic. Start by removing the blown bulb from its housing in the headlamp by turning the bulb…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos