Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Renault Scenic key remote control

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Key

The instructions in this guide will show us how to disassemble and replace the battery of the Renault Scenic key remote. First, take our remote control and start removing the physical key from inside it; then, lever the slot to remove the battery cover, as shown in the video. At this point, remove the battery and replace it with a new one of the correct type (in this case a CR 2032 3V); insert it in the correct direction and finally check the operation of all commands!

Posted on 30 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Renault Scenic remote control?
How to replace the battery of the Renault Scenic remote control?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) In this tutorial, we can see how to replace the battery of the Renault Scenic remote control, an extremely simple and quick operation. To do this, we…
How to Replace the Remote Battery on a Renault Scenic
How to Replace the Remote Battery on a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) This guide shows how to replace the battery in the Renault Scenic's card key remote. After removing the mechanical key from the remote using the side…
How to Replace the Remote Battery in a Renault Scenic?
How to Replace the Remote Battery in a Renault Scenic?
Renault Scenic (2003-2009 / MK 2, Scenic 2) To replace the battery in the Renault Scenic remote, remove the plastic cover located on the side of the remote at the bottom. Once the cover is remo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos