Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Indicator Bulb on a Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side marker bulb

See other generations:
Video tutorial

Follow these steps to replace the indicator bulb on a Renault Scenic. Open the bonnet of the engine compartment and secure it. Remove the black plastic cap of the indicator bulb holder by hand, then take out the damaged bulb.

Replace the damaged bulb with a new one of the same size and voltage. After replacing the damaged bulb, reinstall the bulb holder into the headlight housing.

Repeat the same operation on the other indicator bulb. Finally, test the correct operation of the lights.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to replace the front turn signal bulb of the Renault Scenic.
How to replace the front turn signal bulb of the Renault Scenic.
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's briefly see in this guide the instructions that will allow us to disassemble and replace the front turn signal bulb of the Renault Scenic. Firs…
Replacement of Front Indicator Bulb
Replacement of Front Indicator Bulb
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The front indicator is integrated into the headlamp itself: to replace the bulb, open the bonnet and locate the bulb holder (it is at the top of the …
Replacing the Position Bulb of the Front Headlamp on the Renault Scenic
Replacing the Position Bulb of the Front Headlamp on the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Below are the instructions for removing and replacing the bulbs in the instrument cluster of the Renault Scenic. First, open the vehicle's bonnet and…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos