Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Front indicator bulb replacement

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Light bulb
Operation: Front indicator bulb replacement

The front arrow is integrated in the headlight itself: in order to replace the relative bulb it is therefore necessary to open the front hood and intercept the seat of the lamp holder (it is located in the upper part of the headlight and can be easily reached without having to remove some elements) ; then unhook the bulb holder by turning it anti-clockwise and proceed with the replacement of the indicator bulb (bayonet coupling) and then re-attach the bulb holder to the headlight. You could also opt for the installation of LED lights, paying attention to choose the orange color.


Posted on 2 September 2023 by ScegliAuto



Replacing the bulb of an arrow on a Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Let's see together how to replace the indicator light bulb on a Renault Scenic. We open the hood of the engine compartment and put it in safety, we r
How to replace the headlight bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, we will have to open the front hood of our Renault Scenic. So let's start by disengaging and removing the back cover of the burned o
Replacing the low beam on Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) When working with the engine switched off and the handbrake applied, raise the front hood. Remove the round rubber cap located behind the low beam bu

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos