Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Light Assembly on a Renault Megane III

Model: Renault Megane - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

The procedure for removing the rear light assembly on a Renault Scenic varies slightly depending on whether you are working on the tailgate (the movable part) or the fixed bodywork. For the part that lifts with the tailgate, open it and you will find an access panel in the interior trim near the light.

Remove the panel and inside you will find a nut to turn by hand; unscrew it completely, being careful not to drop it inside the bodywork. At this point, from the outside, you can pull out the light assembly and disconnect the electrical connector.

For the part located on the side, find the screws on the inner side of the boot where there are two access holes, unscrewing two screws. After unscrewing, the part towards the centre of the car is free, but the outer side is still stuck.

Gently push it towards the inside of the car to release it from the fixing pins. Now you can remove it without forcing the cables and disconnecting the electrical contact.


Posted on 13 November 2026 by ScegliAuto


Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) In this video we can see how to disassemble the front light cluster of the Renault Megane III: we find 10 mm bolts clearly visible on the front part …
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the rear light of the Renault Megane, open the tailgate to access the components inside the boot: here you will find the internal cover of …
Renault Megane (2008-2015 / Megane III, Megane 3) The replacement of the bulb located inside the rear light assembly on the Renault Megane can be carried out by opening the hatch, allowing access to …

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos