Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Car Radio

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

To remove the car radio from the console, insert the appropriate tools into the four slots located on the sides of the radio to release the retaining springs. At this point, pull the car radio out of the compartment, carefully disconnecting the connectors and taking care not to pull the wires.

To install the new radio, simply reconnect the connectors exactly to their respective sockets and gently slide the radio back into the compartment, ensuring not to pinch the electrical cables. Turn on the radio and perform a complete test to verify its proper functioning.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Removing the Car Radio from Renault Megane 3
Removing the Car Radio from Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) Today, in this video tutorial, see how to remove the original car radio from a Renault Megane third generation. Get inside the car and use a plastic …
Removing the Car Radio from a Renault Megane
Removing the Car Radio from a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Remove the car radio from the Renault Megane if you want to replace it with a new one. Detach the stereo trim with a plastic lever (where the stereo …
Removing Air Vents on Renault Megane
Removing Air Vents on Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Replace the air vents on a Renault Megane. To remove, lever the top and bottom using trim tools (as shown in the video). Disconnect the air vents and…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos