Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Tail light

See other generations:
Video tutorial

Do you want to replace the rear light on the Renault Clio or just the bulbs? To remove the light, unscrew the securing screws. Use a socket or screwdriver to unscrew the securing nuts located at the side of the rear light (boot side).

Once the light is free from any constraints, detach it from the bodywork by disconnecting the relevant power connectors. Replace any damaged bulbs with identical ones in size and voltage.

Refit the light and test the operation of the lights after reassembly (turn on the lights using the control levers).


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Light of a Clio
Removing the Rear Light of a Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Let’s look at removing the rear light of a Renault Clio. Lift the tailgate to access the sides of the boot and locate the screws securing the light. …
Removing the Rear Light on a Renault Clio
Removing the Rear Light on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How to remove the rear light on a Renault Clio? Let's see how to do it. Open the boot lid, undo the plastic screw located above the fabric lining. On…
Removing the Rear Light on Renault Clio 3
Removing the Rear Light on Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Lift the boot and undo the three bolts securing the rear light to the bodywork. Use a socket with a Torx insert size 20 for this. At this point, it w…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos