Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : Removing the cable and base of the radio antenna on Renault Clio 4

Renault Clio - Video tutorial

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years 2012-2019
Part: Antenna
Operation: Removing the cable and base of the radio antenna on Renault Clio 4

Open the boot lid and remove the inner canopy. By pressing the appropriate buttons next to the head restraint, you can make the rear seat backrests fall forward. Looking at the inside of the passenger compartment from the trunk, unscrew the torx on your right and then remove the plastic, also removing the gasket of the trunk to work with more space. Behind this plastic you will find the antenna cable that you are going to disconnect. Now unscrew the screw that fixes the ceiling and the antenna support, then unscrew the third seat belt (also fixed to the car ceiling), then lower the rear part of the ceiling to be able to unscrew and then remove both the base and the radio antenna cable.


Posted on 2 January 2024 by ScegliAuto



Replace Renault Clio antenna
Renault Clio (1998-2005 / Clio 2, MK 2) Let's see the disassembly of the antenna base on a Renault Clio. We remove the plastic cover from under the protective roof panel: we peel off the pr
How to replace the stereo / car radio on Renault Clio 2
Renault Clio (1998-2005 / Clio 2, MK 2) Let's see in this video how to disassemble and replace the original car stereo with one compatible with AUX or USB on a Renault Clio second series, f
How to remove Renault Clio car stereo
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) How to disassemble the radio navigator of the Renault Clio? Before disassembling the radio, we must disassemble the plastic cover of the same, let's

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos