Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard Bulbs of a Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Interior dome light bulb

See other generations:
Video tutorial

Before you can start, sit in the driver's seat of your Renault Clio. Begin by removing the radio, extracting it from its housing using the extraction keys, then disconnect the rear plug. This will give you access to the screws that secure the climate control panel.

Next, unscrew and remove these screws using a Torx T20. Once this step is complete, remove the upper trim of the controls, followed by the lower plastic section. At this point, extract the controls from their housing, and you will reach the blown bulbs.

To remove them, use a small pair of pliers, and you will have completed the disassembly. To install the new bulbs and reassemble the dashboard, follow these steps in reverse, and you will have finished the replacement.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Change the Air Conditioning Bulbs on a Renault Clio
How to Change the Air Conditioning Bulbs on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) How to change the bulbs or LEDs in the air conditioning controls on a Renault Modus? Watch this video for guidance. Remove the radio from the dashboa…
How to replace the rear headlight bulbs of the Renault Clio
How to replace the rear headlight bulbs of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Below we will see the instructions on how to disassemble and replace the bulbs of the rear headlight of the Renault Clio. First, we open the rear tai…
How to Remove the Instrument Panel on a Renault Clio
How to Remove the Instrument Panel on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, learn how to remove the instrument panel on a Renault Clio. First, use a lever to remove the side plastic around the air conditioning …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos