Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Tail light bulb

Below we will see the instructions on how to disassemble and replace the bulbs of the rear headlight of the Renault Clio. First, we open the rear tailgate of the trunk and start unscrewing the fixing screws that we find on the side of the headlight, disconnecting the electrical connector of the bulbs to remove it; we separate the bulb holder from the light fixture to access the bulbs, as shown in the video. At this point, if necessary, we replace the bulbs of the second brake light, accessing them from inside the trunk tailgate; we check the operation of all the bulbs!

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on a Renault Clio
How to Replace the Rear Headlight Bulbs on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Learn how to replace the rear headlight bulbs on a Renault Clio. Open the boot lid, and using a screwdriver, unscrew (with a socket or screwdriver wi…
How to Replace the Front Headlight Bulbs of a Renault Clio
How to Replace the Front Headlight Bulbs of a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Here’s how to replace the front headlight bulbs of a Renault Clio. Open the bonnet and secure it. You will find the inspection caps for the headlight…
Changing the Front Headlight Bulb on a Renault Clio
Changing the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Are the front headlight bulbs blown and in need of replacement? Here’s how to change them on a Renault Clio. Open the front bonnet by pulling the lev…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos