Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing All Rear Bulbs on Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Work with the car off, the key removed, and the handbrake engaged. The reverse bulb is located in the centre (vertically speaking) at the side of the tailgate.

Open the boot and unscrew the screws next to the affected rear light. Disconnect the light from its housing.

Unplug the main connector, then remove the black cover where all the bulbs are mounted. Unscrew the bulb to be replaced and screw in the new bulb you have purchased.

For reassembly, simply reverse the steps: reassemble the light, connect the connector, mount it back in place, and screw it in.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Renault Clio?
How to Replace the Rear Light Bulbs on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the rear bulbs on a Renault Clio, you need to distinguish between the reverse lights and the other bulbs: the reverse lights can be replac…
How to Change the Rear Bulbs on the Renault Clio 4?
How to Change the Rear Bulbs on the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Change the rear bulbs on the Renault Clio 4 by following these steps: 1) lift the boot lid; 2) remove the two Torx screws next to the rear light; 3) …
Replacing Rear Bulbs on Renault Clio 2
Replacing Rear Bulbs on Renault Clio 2
Renault Clio (1998-2005 / MK 2, Clio 2) The lowest and side bulb is for the position light, the one at the bottom towards the boot is for the fog light, the centre-lower light is for revers…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos