Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Front bumper

Open the bonnet and insert the support rod. Remove the wheel arch liner by taking out the fastening clips near the wheel, then go underneath the body and undo the Torx bolt that secures it. Repeat the process on the other side. At this point, undo the exposed bolts that secure the wings. To remove the rest of the bumper, you need to undo the two central screws above it (near the bonnet) and remove the round side clips by prying with a small flat screwdriver. Gently pull the bumper to remove it, and you're done. Proceed in reverse for reassembly.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Renault Clio
How to Remove the Front Bumper on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet …
Renault Clio Diesel Filter Removal
Renault Clio Diesel Filter Removal
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To remove the diesel filter on a Renault Clio, take out the diesel filter located in the front bumper. Remove the right wheel, then take off the plas…
Removing Front Bumper on Renault Clio 3
Removing Front Bumper on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, you will learn how to remove the front bumper of a third-generation Renault Clio. First, remove the wheel arch liners by unsc…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos