Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Replacing the front bulbs on Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Headlight
Operation: Replacing the front bulbs on Renault Scenic

Working with the handbrake on and the engine off, let's start with the low beam bulb: remove the rear rubber cover of the headlight concerned, turning it slightly, then disconnect the connector. Together with the same, the bulb will also come out of its seat, which you can then extract and remove. Insert the new bulb making sure it is properly seated in the center of the headlight. Reconnect the connector and replace the rubber cover. The video also shows you how to replace the other bulbs, if you need them. It is a job within everyone's reach.


Posted on 18 February 2024 by ScegliAuto



Replacing the rear light bulbs on the Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) In this guide we will see the steps that will allow us to disassemble and replace the rear light bulbs of the Renault Scenic. First we open the tailg
Guide to replacing the front headlight bulb of the Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Today's guide will show us the main steps useful for disassembling and replacing the headlight bulbs of the Renault Scenic. The video demonstrates th
How to remove the front headlight of a Renault Scenic 2
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) In this video we can see how to disassemble the front headlight of a Renault Scenic 2: to do the job we will need a ratchet key of 10 mm and an exten

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos