Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on a Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Diesel fuel filter

Lift the bonnet and insert the support rod. Now remove the front right wheel, as access will be needed from this area to remove the fuel filter. To remove the wheel, loosen the bolts, lift the vehicle, and unscrew them completely until the wheel is free. Next, use a cutting tool, such as a trim tool or flat screwdriver, to remove the wheel arch clips. Once this is done, unscrew the 13 mm bolts securing the filter bracket, disconnect the pipes, and remove the filter after preparing a container underneath.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on a Renault Clio
Replacing the Diesel Filter on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Replace the worn diesel filter from the engine bay of the Renault Clio. Lift the front bonnet; locate the diesel filter as shown in the video. Using …
How to Replace the Diesel Filter on a Renault Clio 1.5 DCI?
How to Replace the Diesel Filter on a Renault Clio 1.5 DCI?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide outlines the procedure for removing and replacing the diesel filter on a Renault Clio 1.5 DCI. First, lift the vehicle and start by removi…
How to Replace the Diesel Filter on the Renault Clio 4 1.5 DCI
How to Replace the Diesel Filter on the Renault Clio 4 1.5 DCI
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video tutorial, we will see how to dismantle and replace the diesel filter on the fourth series Renault Clio, in simple and quick steps. Firs…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos