Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter in Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Air filter

In this video we can see in detail how to replace the air filter in the Renault Clio 3. To do this we need a flat tip screwdriver and a Torx T25 wrench. We start by disconnecting the upper tube, continue unscrewing the screw of the sleeve clamp, remove the front socket and disengage the airbox from the clips. At this point we will have removed the entire unit. To replace the filter, simply unscrew the indicated Torx screws, extract it and insert the new spare. Reassembling everything is just as easy, simply follow the same steps inversely.

Posted on 23 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Renault Clio 2012
How to replace the air filter of the Renault Clio 2012
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the engine air filter of your Renault Clio third series (year 2012) is really simple and thanks to the procedure described below, you will …
How to change the Renault Clio cabin filter
How to change the Renault Clio cabin filter
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Change the worn cabin filter? Let's see the replacement of the cabin air filter on Renault Clio. Unhook the plastic covering the air filter holder lo…
How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos