Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : How to replace the sidelight bulb in Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Light bulb
Operation: How to replace the sidelight bulb in Renault Clio?

Replacing the sidelights bulbs in the Renault Clio MK2 is very simple, let's see how to proceed in the attached video tutorial. After getting us the replacement bulbs, for example the LED T10s, we open the engine hood and unscrew the large rear plastic cap of the headlight. At this point we can easily identify the bulb in question, it is the smallest one next to that of the low beam. We hold the lamp holder, rotate it counterclockwise and extract it from its seat, replace the bulb and finally reassemble everything, taking care to test the bulb first.


Posted on 18 March 2024 by ScegliAuto



How do you replace the headlight bulb on the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To be able to replace the headlight bulb on your Renault Clio 4, you need to open the bonnet and access the inside of the headlight corresponding to
How to replace the headlight bulb in Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we see how to extract and replace the headlight bulb in the fourth series Renault Clio. More precisely we will deal with the H7 type dipped bea
How to replace the headlight bulb on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before we begin, we will have to open the front hood of our Renault Clio. So let's start by going to disengage and remove the internal cover of the b

Other guides that may interest you

    Frequently Asked Questions

    • Clio 2012-2019 - Why don't the position lights on my Renault Clio work? Read Answer
    • Clio 2012-2019 - How do you replace the position lights on the Renault Clio? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos