Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Replacing the gear knob on the Renault Clio 3

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Gear Shift Knob
Operation: Replacing the gear knob on the Renault Clio 3

Let's find out in this video how to remove and replace the gear knob on the Renault Clio third series, in simple and quick steps. First we get in the car and start by removing our gear knob; to do so let's grab it and pull it strongly upwards, in order to detach it with all the headphones, as shown in the video. At this point we separate the old knob from the gearshift gaiter, replacing it with the new one; once inserted into the headset we are going to correctly fix the knob on the gear lever, also fixing the headset on the sides.


Posted on 18 March 2024 by ScegliAuto



How to remove the gear knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before starting, we will have to sit in the driver's seat of our Renault Clio. Let's start then by going to disengage and lift the lower section of t
How to remove the gear knob of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Soon we will see the instructions that will allow us to disassemble and replace the knob of the Renault Clio gear lever, in simple steps. First, get
Replacing the gear knob in the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the gear knob in the Renault Clio 4, we naturally enter the passenger compartment and the first thing to do is to detach the boot, from th

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos