Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace the radiator of the Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Radiator
Operation: How to replace the radiator of the Renault Clio?

In order to replace the Renault Clio radiator, the hood must be opened so that the screws located on the upper part of the front bumper can be loosened. By loosening these screws, you can remove the fixing brackets of the upper part of the radiator. This will also be fixed by some screws that will be accessible from the bottom of the car: once these screws have also been removed, it will be possible to remove the radiator after disconnecting the connectors. The old radiator can therefore be replaced with a new spare part.


Posted on 22 March 2024 by ScegliAuto



Remove the radiator fluid reservoir on Renault Clio 1
Renault Clio (1990-1998 / Clio 1, MK 1) In this video tutorial we will see how to remove the radiator fluid reservoir or the expansion tank on the Renault Clio first series, following these
How to reset the "Service" light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before we can begin, we will have to sit in the driver's seat of our Renault Clio. Let's start by activating the instrumentation of our Renault Clio.
How to remove the cylinder head of a Renault Clio
Renault Clio (1990-1998 / Clio 1, MK 1) Before we can begin, we will have to go and open the front hood of our Renault Clio. So let's start by disconnecting the spark plug pipettes, then un

    Frequently Asked Questions

    • Clio 1998-2005 - Where is the Renault Clio radiator bleed screw located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos