Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery of the Renault Kadjar

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Key

To replace the battery of the Renault Kadjar remote, look at the shorter side; there are two slots. With the slots on the right side and the remote in a horizontal position, slide the shell of the remote (where the brand logo is) from right to left and remove it. Once the top shell is off, you will find the emergency key that allows you to open the car when the remote is flat, and the battery protected by a cover. Remove the cover using the emergency key by prying it off from underneath, and do the same for the battery (if you cannot do it with the emergency key, you can use a small flat screwdriver), prying from below. After removing the battery, take the new battery (battery code CR2032), remove it from the packaging, place it in the slot of the old battery, replace the battery cover, and reattach the key shell by sliding it from left to right. Finally, you can test the new battery.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Kadjar (2015-2022 / MK 1) The steps to replace the battery in the Renault Kadjar key fob are simple and quick to perform independently. To replace the battery, remove the cove…
Renault Kadjar (2015-2022 / MK 1) The battery inside the Renault Kadjar remote control can be replaced by levering with an object in order to completely detach the panel on the back o…
Renault Kadjar (2015-2022 / MK 1) In the following guide you will find the description of all the steps you need to follow in order to replace the battery in the remote control of you…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos