Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

Video tutorial

This short video will show you how to disassemble and replace the battery in the electronic key fob for the Renault Kadjar. First, take your key fob and start by removing the cover to access the circuit board and battery.

Then, remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V), as shown in the video. At this point, insert the new battery in the correct orientation, reassemble the key fob, and finally check the operation of the buttons!


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Renault Kadjar
How to Replace the Key Battery on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The steps to replace the battery in the Renault Kadjar key fob are simple and quick to perform independently. To replace the battery, remove the cove…
How to Replace the Remote Battery in a Renault Kadjar?
How to Replace the Remote Battery in a Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) In this tutorial, you will learn how to replace the remote battery in a Renault Kadjar, a very simple and quick operation. For this, you will need a …
How to Replace the Remote Battery on a Renault Kadjar
How to Replace the Remote Battery on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) To replace the remote battery on a Renault Kadjar, slide the cover on the back of the remote, which has the manufacturer's logo. By sliding it upward…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos