Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Renault Kadjar

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Key

The steps to replace the battery in the Renault Kadjar key fob are simple and quick to perform independently. To replace the battery, remove the cover of the fob using a flathead screwdriver. Once the cover is removed, you can replace the worn battery with a CR 2032 3 Volt battery, which can be purchased online or at auto parts stores. Close the fob cover and test the key's functionality. If it does not work, you will need to reprogram the fob.

Posted on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Renault Kadjar
How to Replace the Key Battery of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) If the smart key of your Renault Kadjar has suddenly stopped working due to a flat battery and you don't know how to replace it, just follow these in…
How to Replace the Key Battery in a Renault Kadjar
How to Replace the Key Battery in a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) After several months or years of use, it may happen that the smart key for your Renault Kadjar (2015-2022) stops working due to a completely flat bat…
How to Replace the Remote Battery in a Renault Kadjar?
How to Replace the Remote Battery in a Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) In this tutorial, you will learn how to replace the remote battery in a Renault Kadjar, a very simple and quick operation. For this, you will need a …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos