Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the bumper in order to remove the headlight of a Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Front bumper

In this video we will see how to change the position light of a Renault Modus and clean its radiator, to do everything it is necessary to remove the bumper. To remove the bumper it is necessary to unscrew all the fixing screws, once removed it is possible to remove the bumper. To disassemble the lighthouse it is necessary to remove the 3 bolts that hold the light to the fixing plate. Once removed, it is necessary to disconnect the headlight connectors and then remove it. To insert the new bulb it is necessary to open the plastic housing the position light, being careful not to let the bulb touch the edges.

Posted on 14 February 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the front lights bulbs of a Renault Modus without removing the bumper.
How to replace the front lights bulbs of a Renault Modus without removing the bumper.
Renault Modus (2004-2013 / MK 1) In this video, we are shown how to change the bulbs in the front headlight assembly of a Renault Modus without having to remove the entire front bump…
Removal of the third stop Renault Modus
Removal of the third stop Renault Modus
Renault Modus (2004-2013 / MK 1) In this video tutorial we will see how to remove the third rear stop of a Renault Modus, in case you want to remove the bulbs. First we open the boot…
How to replace the front headlight and bulbs of the Renault Modus.
How to replace the front headlight and bulbs of the Renault Modus.
Renault Modus (2004-2013 / MK 1) The instructions in this guide will show us how to disassemble and replace the front headlight and its bulbs of the Renault Modus. First, we open the…

Other guides you may be interested in

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos