Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cover of the Wing Mirror of the Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Side mirror

See other generations:
Video tutorial

If you need to remove the outer cover of the wing mirror of your Renault Clio Mk2 but don't know how to proceed, simply follow these tips. The entire procedure takes only a few minutes to complete correctly and you will only need a standard flat-head screwdriver.

Before proceeding, ensure the engine is off and the car is parked on a flat surface. Next, stand in front of the mirror in question, fold it completely, and locate a thin gap at the rear.

Using the flat screwdriver, apply a gentle outward push to separate the cover. Finally, pull it off with your hands.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to remove the exterior rearview mirror of the Renault Clio.
How to remove the exterior rearview mirror of the Renault Clio.
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Below, we will discover all the information related to the disassembly and replacement of the external rearview mirror of the Renault Clio. First, le…
Replacing the External Wing Mirror of the Renault Clio
Replacing the External Wing Mirror of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today, you will learn how to remove and replace the external wing mirror of the Renault Clio. First, open the front door of the vehicle and begin by …
How to Remove the Mirror from the Rear View Mirror on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) How to remove the mirror from the rear view mirror on Renault Clio? Follow these steps: use a plastic or rubber spatula to pry between the edge of th…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos