Do it yourself
| ||||
|
Renault Megane - Video tutorial
Model: Renault Megane
Megane III, Megane 3
- Years 2008-2015 In this video tutorial you can see how you can replace the halogen bulbs of the Renault Megane. First you need to buy suitable bulbs for your car (H7 + H1 12V). Now get inside the car, pull the handbrake and work with the engine off. Now open the bonnet and secure it with the special safety bar. To access the bulbs you have to remove the headlight block. With a screwdriver you have to unscrew the two support screws of the headlight block. Now grab the lighthouse with your hands making small movements. You now have access to the bulbs so remove the protective covers. Now you have to pull the connectors to remove the bulb which is held in place by two metal tabs. Now take out the bulb and replace it with the new one that works. Reassemble all the parts by working backwards.
Posted on 23 April 2024 by ScegliAuto
How to change the headlight bulbs of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Have we decided to replace the headlight bulbs of our Renault Megane? Let's see in this video how to proceed with the replacement of the lighting bul
Renault Megane 4 headlight bulb replacement
Renault Megane (2015-2023 / Megane 4, Megane IV) In this video tutorial we will see how to remove the headlight bulb of a Renault Megane fourth series. The video in question illustrates the replacem
How to replace the low beam bulbs in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) Replacing the low beam bulbs in the Renault Megane 3 is very simple, let's see how to proceed in the attached video tutorial. For this operation we n Other guides that may interest you
|
Frequently Asked QuestionsHow do you replace the horn on the Citroà «n Berlingo?In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |