Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear light and bulbs of the Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tail light

In a few simple steps, we will see the process of how to disassemble and replace the rear light and its bulbs of the Renault Megane. First, open the rear hatch of the trunk and start removing the carpeted side lining; then unscrew the plastic screw of the light and disconnect the electrical connector of the bulbs, as shown in the video. At this point, replace the light with the new one, replacing only the stop bulbs if necessary; reassemble the rear light and make the connection, checking the functioning of the lights!

Posted on 11 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Light of the Renault Megane
How to Change the Rear Light of the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide shows how to remove and replace the rear light of the Renault Megane in simple and quick steps. First, open the boot lid and start by remo…
Replacing the Rear Light Bulbs on a Renault Megane
Replacing the Rear Light Bulbs on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the rear light bulbs on your Renault Megane, follow these steps. Open the boot and use a lever to remove the plastic cover next to the boo…
How to Change the Rear Light Bulbs on a Renault Megane
How to Change the Rear Light Bulbs on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to change the rear light bulbs on a Renault Megane? Open the boot lid, unscrew the securing screws located at the side of the rear light using a …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos