Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to reset the Renault Grand Scenic service

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: -board computer
Operation: How to reset the Renault Grand Scenic service

To reset the Renault Grand Scenic, turn on the instrument panel and notice that the word "service required" appears. To reset, scroll with the button at the bottom of the lever that controls the wipers until the word "service required" appears, hold down the same button until the word "service required" and the new kilometers flash and the wrench warning light goes out; now we can turn off the car's instrument panel. Finally we turn the instrument panel and the car back on to check that the wrench light remains off.


Posted on 25 April 2024 by ScegliAuto



How to reset the service light of the Renault Scenic - Grand Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) In this short and simple guide we will see the procedure that will allow us to reset the service light of the Renault Scenic and Grand Scenic. First
How to perform a service reset on Renault Grand Scenic
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) In this video tutorial we can see how to reset the maintenance light on Renault Grand Scenic. The first thing to do is vehicle maintenance such as ch
How to reset the tire warning light on the Renault Grand Scenic?
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) In this tutorial, we can see how to reset the tire warning light in the Renault Grand Scenic, an extremely simple and quick operation, to be performe

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the explanation of the warning lights on the Renault Scenic? Read Answer
    • Scenic 2009-2015 - Renault Scenic brake system fault warning light? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos