Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror Cap on the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Side mirror

To replace the cap on the external rear-view mirror of the Renault Clio, you need to remove the mirror glass by gently pulling it from its housing. On the back of the glass, there will be two tabs that need to be pushed down to remove the cap. The tabs can be pushed down with your fingers or a screwdriver, and while they are depressed, pull the cap off. Once the old cap is removed, you can fit the new cap, securing it with the tabs and repositioning the mirror glass.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the turn signal bulb of the Renault Clio's side mirror
Replacement of the turn signal bulb of the Renault Clio's side mirror
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today's step-by-step instructions will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Renault Cli…
How to remove the exterior rearview mirror of the Renault Clio.
How to remove the exterior rearview mirror of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Below, we will discover all the information related to the disassembly and replacement of the external rearview mirror of the Renault Clio. First, le…
Removing the External Rear-View Mirror on the Renault Clio 3
Removing the External Rear-View Mirror on the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, you will learn how to remove the external rear-view mirror on a Renault Clio third series in simple steps. First, open the front door …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos