Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing External Mirror on Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Side mirror

To replace the damaged mirror on a Renault Clio, follow these steps. Remove the internal plastic cover of the mirror, unscrew the securing screws with a screwdriver (located at the sides of the door), and disconnect the mirror's power connector (control cable). Remove the mirror from the car door. Fit the new mirror with the control cables and securing screws at the sides where it attaches to the door panel. Finally, test the correct operation of the mirror by entering the vehicle and adjusting it.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Renault Clio
How to disassemble the external rearview mirror of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Today's guide will show us the process of disassembling and replacing the external rearview mirror of the Renault Clio. First, we open the front door…
How to remove the exterior rearview mirror of the Renault Clio.
How to remove the exterior rearview mirror of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Below, we will discover all the information related to the disassembly and replacement of the external rearview mirror of the Renault Clio. First, le…
How to Replace the External Wing Mirror on the Renault Clio
How to Replace the External Wing Mirror on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will show you how to remove and replace the external wing mirror on the Renault Clio. First, open the front door and start by rem…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos