Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Renault Clio

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

When resetting the service/oil change light, always ensure that you have carried out the necessary maintenance as required by the vehicle to ensure your safety and that of others. Now, let's see how to reset the light.

First, close all four doors, then insert the electronic key into the designated slot. Next, locate the double button at the top of the lever to the right of the steering wheel.

Press and hold the "up" button until it starts to flash. At this point, you can remove the electronic key. Reinsert it and restart the vehicle.

The light should now be off.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
Renault Clio (2019-2026 / Clio V, Clio 5) .. Let’s see how to reset the service light on a Renault Clio V: turn on the ignition without starting the engine a.. …
Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos